果冻视频

The Vari-Green remote dial control allows the user to manually adjust the fan's speed from a remote location. This control includes a countdown timer to automatically turn the fan off after 10, 30, 60 or 90 minutes. Recommended for use in commercial buildings and restaurants.

• Mounts to a single or multi-gang junction box
• Includes lockout feature to prevent tampering.

Hinge kit allows the fan to hinge at the base of the curb cap for access to the wheel and ductwork for inspection and cleaning.

Hinge curb bracket kits allow the fan to tilt away from the curb for access to the wheel and ductwork for inspection and cleaning.

The Constant Airflow Control is used to monitor velocity pressure in a system, automatically adjusting the fan speed to maintain a desired velocity pressure (constant CFM). This control reduces energy consumption not only by reducing the speed and the energy used by the fan, but will also reduce the amount of conditioned air that is exhausted. Recommended for use in multi-family structures, hotels and schools where demand control ventilation applications exist.

• 2-line, backlit display
• Dedicated airflow control mode
• Integral pressure transducer maintains compact form
• NEMA-4 enclosure on all components
• Pressure range of +/- 1.0 inch wg
• Intended for use with Greenheck's Vari-Green motor and Vari-Green Drive

The Vari-Green transformer provides a 24-volt power source from the existing line voltage at the fan to the motor and controls. It has two dry auxiliary contacts (one normally open and one normally closed) available to signal a motorized damper or interlock with other devices.

The Constant Pressure Control can be used to monitor static pressure in a system, automatically adjusting the fan speed to maintain a desired static pressure. This control reduces energy consumption not only by reducing the speed and the energy used by the fan, but will also reduce the amount of conditioned air that is exhausted. Recommended for use in multi-family structures, hotels and schools where demand control ventilation applications exist.

• 2-line, backlit display
• Dedicated airflow control mode
• Integral pressure transducer maintains compact form
• NEMA-4 enclosure on all components
• Pressure range of +/- 1.0 inch wg
• Intended for use with Greenheck's Vari-Green motor and Vari-Green Drive

The Constant Pressure Control can be used to monitor static pressure in a system, automatically adjusting the fan speed to maintain a desired static pressure. This control reduces energy consumption not only by reducing the speed and the energy used by the fan, but will also reduce the amount of conditioned air that is exhausted. Recommended for use in multi-family structures, hotels and schools where demand control ventilation applications exist.

• 2-line, backlit display
• Dedicated airflow control mode
• NEMA-4 enclosure on all components
• Pressure range of +/- 1.0 inch wg
• Remote pressure transducer provides installation flexibility
• Intended for use with Greenheck's Vari-Green motor and Vari-Green Drive

The WD-100 series are horizontally mounted backdraft dampers designed to allow vertical airflow up and prevent reverse airflow. The dampers are opened by air pressure differential (assisted by springs) and closed by gravity. The damper features a flangeless, galvanized steel frame and aluminum blades.

• Width and height furnished approximately 0.125 in. under size

Curb adapters are designed to adapt standard curb cap dimensions to existing curb when replacing a fan or ventilator. Constructed of galvanized steel. For use with CUE models, sizes 060 through 070, and G models, sizes 060 through 095.

• Increases mounting area of fan base to fit larger curb
• Adapt your existing curb to a new rooftop unit
• Allows for quick and easy replacements
• Galvanized steel construction

The Constant Pressure Control can be used to monitor static pressure in a system, automatically adjusting the fan speed to maintain a desired static pressure. This control reduces energy consumption not only by reducing the speed and the energy used by the fan, but will also reduce the amount of conditioned air that is exhausted. Recommended for use in multi-family structures, hotels and schools where demand control ventilation applications exist.

• 2-line, backlit display
• Dedicated airflow control mode
• Integral pressure transducer maintains compact form
• NEMA-4 enclosure on all components
• Pressure range of +/- 1.0 inch wg
• Intended for use with Greenheck's Vari-Green motor and Vari-Green Drive

GPI roof curbs are designed for flat, insulated or non-insulated roof decks. Constructed of 18 gauge galvanized steel and fully formed on three sides with a single, fully welded seam.

• Designed to fit 17" roof curb cap
• 2-inch mounting flange
• Rigid, fiberglass insulation
• Welded, straight-sided construction

The Indoor Air Quality Temperature / Humidity control monitors the temperature and/or the relative humidity in a space. It will automatically adjust the ventilation rate to or from a space by increasing or decreasing the speed of the fan based on the desired set point. Recommended for use in assisted living facilities, schools, prisons and buildings constructed of materials that are more sensitive to high moisture levels.

• Adjustments for set point, minimum and maximum fan speed
• Fan speed and temperature or humidity level are available as an analog output to read by a building automation system or secondary device.

The Constant Pressure Control can be used to monitor static pressure in a system, automatically adjusting the fan speed to maintain a desired static pressure. This control reduces energy consumption not only by reducing the speed and the energy used by the fan, but will also reduce the amount of conditioned air that is exhausted. Recommended for use in multi-family structures, hotels and schools where demand control ventilation applications exist.

• 2-line, backlit display
• Dedicated airflow control mode
• NEMA-4 enclosure on all components
• Pressure range of +/- 1.0 inch wg
• Remote pressure transducer provides installation flexibility
• Intended for use with Greenheck's Vari-Green motor and Vari-Green Drive

Model GPF roof curbs are designed for high wind applications and flat roof installations. Constructed of heavy gauge galvanized steel and fully formed on three sides with a single, fully welded seam.

• Designed to fit 17" roof curb cap
• 2-inch mounting flange
• Rigid, fiberglass insulation
• Welded, straight-sided construction

The Constant Pressure Control can be used to monitor static pressure in a system, automatically adjusting the fan speed to maintain a desired static pressure. This control reduces energy consumption not only by reducing the speed and the energy used by the fan, but will also reduce the amount of conditioned air that is exhausted. Recommended for use in multi-family structures, hotels and schools where demand control ventilation applications exist.

• 2-line, backlit display
• Dedicated airflow control mode
• Integral pressure transducer maintains compact form
• NEMA-4 enclosure on all components
• Pressure range of +/- 1.0 inch wg
• Intended for use with Greenheck's Vari-Green motor and Vari-Green Drive

The two-speed control allows motor RPM (fan speed) to operate between two discreet speeds (A or B) through an SPDT switch or relay connected to the dry contact input or through wet voltage (115-230VAC) applied to the digital input terminal. This control accepts an input voltage of 115/208-240V and is intended for use with Greenheck's Vari-Green motor. Recommended for use in schools, restaurants, multi-family structures and condos where manual or demand controlled ventilation applications requiring high and low speed operation exist.

• Accepts input voltage of 85-277VAC
• Intended for use with Greenheck's Vari-Green motor and Vari-Green Drive

The Constant Pressure Control can be used to monitor static pressure in a system, automatically adjusting the fan speed to maintain a desired static pressure. This control reduces energy consumption not only by reducing the speed and the energy used by the fan, but will also reduce the amount of conditioned air that is exhausted. Recommended for use in multi-family structures, hotels and schools where demand control ventilation applications exist.

• 2-line, backlit display
• Dedicated airflow control mode
• NEMA-4 enclosure on all components
• Pressure range of +/- 1.0 inch wg
• Remote pressure transducer provides installation flexibility
• Intended for use with Greenheck's Vari-Green motor and Vari-Green Drive

The Indoor Air Quality VOC control senses the level of volatile organic compounds (VOCs) in a space and automatically adjusts the ventilation rate to the space by increasing or decreasing the speed of the fan based on the level of VOCs present. Up to 10,000 unique VOCs exist and Greenheck's VOC sensor can detect all of them. Recommended for applications experiencing intermittent human traffic including bathrooms, classrooms, cafeterias, or other spaces where quality of air is a concern.

• Adjustments for air quality setpoint, minimum and maximum fan speed
• Fan speed and VOC level are available as analog outputs to be read by a building automation system or secondary device.

Model GPF roof curbs are designed for high wind applications and flat roof installations. Constructed of heavy gauge galvanized steel and fully formed on three sides with a single, fully welded seam.

• Designed to fit 17" roof curb cap
• 2-inch mounting flange
• Rigid, fiberglass insulation
• Welded, straight-sided construction

The Vari-Green remote dial control allows the user to manually adjust the fan's speed from a remote location. This control mounts to a wall using a 2x4 junction box and is supplied with a wall cover plate. Recommended for use in commercial buildings and restaurants.

GPI roof curbs are designed for flat, insulated or non-insulated roof decks. Constructed of 18 gauge galvanized steel and fully formed on three sides with a single, fully welded seam.

• Designed to fit 17" roof curb cap
• 2-inch mounting flange
• Rigid, fiberglass insulation
• Welded, straight-sided construction

The Constant Airflow Control is used to monitor velocity pressure in a system, automatically adjusting the fan speed to maintain a desired velocity pressure (constant CFM). This control reduces energy consumption not only by reducing the speed and the energy used by the fan, but will also reduce the amount of conditioned air that is exhausted. Recommended for use in multi-family structures, hotels and schools where demand control ventilation applications exist.

• 2-line, backlit display
• Dedicated airflow control mode
• NEMA-4 enclosure on all components
• Pressure range of +/- 1.0 inch wg
• Remote pressure transducer provides installation flexibility
• Intended for use with Greenheck's Vari-Green motor and Vari-Green Drive

GPI roof curbs are designed for flat, insulated or non-insulated roof decks. Constructed of 18 gauge galvanized steel and fully formed on three sides with a single, fully welded seam.

• Designed to fit 17" roof curb cap
• 2-inch mounting flange
• Rigid, fiberglass insulation
• Welded, straight-sided construction